Suntec Oil Pump Strainers


Suntec Oil Pump  Strainers

Checking the strainer in your fuel pump should be part of the routine annual maintenance of your oil furnace or boiler.  It should also be checked if you are not getting a good oil flow at the nozzle or you have pulsating pressure.  To check the strainer, remove the four screws on the front cover with a 5/32 Allen wrench.

Suntec Pump




strainer for Suntec Pump





You can clean the strainer with a brush and clean fuel oil or replace it with an inexpensive new strainer.  Look at the first letter of the Suntec model number to determine the right strainer.  There are different strainers for the A-series, B-series and J or H-series pumps.

For more information:

Suntec Field Service and Trouble Shooting Guide


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: